Eclectic Living-Dining

      STEP BY STEP INSTRUCTIONS
      VELVET FRAME

      This large frame was used as a dividing point between the living  area and the dining area.

      TOOLS AND MATERIALS NEEDED

      • Large wooden frame
      • Fabric scissors
      • Velvet fabric
      • High perfomance spray glue
      • Foam board
    Getting Started...

    FRAME

    1. Make a frame out of wooden moulding or use any old picture frame.

    2. Cut the velvet fabric into strips that fit over 1 length of the frame.

    3. Spray the back of the material with high performance spray glue.

    4. Smooth the fabric onto the surface. Run a coin along the ridges.

    5. Cut the corner fabric off about 1" from the end. Then fold it under, adding a bit more glue if required, and stick the corner down.

    6. Cut out strips of foam board that fit directly over the back of the frame.

    7. Cut strips of fabric to fit over the pieces of foam board.

    8. Glue the fabric to the foam boards, then glue these onto the  back of the frame, avoiding seeing the brackets or the back of the frame. Skip this stage if you are putting the frame onto a wall.
     

[main] [bead chandelier] [faux granite table]
[colour washing with roller] [faux fireplace]